PhD studentships in Electrochemistry, Materials Chemistry, Electrocatalysis and Batteries

WE ARE RECRUITING 12 PhD students (6 UK/Ireland and 6 International) to start in October 2025. Each 4-year studentship is generously funded with an enhanced stipend, all tuition fees covered, and research support funding, including for participation in conferences.
Successful students will join our new (CEFT), which aims to develop innovative fuel cell and battery technologies, underpinned by fundamental understanding. The Centre is an exciting venture bringing together leading research groups in the Department of Chemistry, Warwick Manufacturing Group (WMG) and the School of Engineering at the University of Warwick. With world-leading expertise and facilities in electrochemistry, materials chemistry, spectroscopy, microscopy, modelling and battery and fuel cell construction and testing, we aim to develop next generation electrochemical energy technologies through holistic views of ammonia fuel cells and metal and metal ion (Li, Na, Ca etc.) batteries, from the nanoscale to device level.
In addition to the range of exciting projects offered, the cohort of CEFT PhD student will benefit from bespoke training courses and opportunities for collaboration across the departments, with CEFT academics and their collaborators (within Warwick, nationally and internationally).
Candidates with first degrees (Bachelor's and/or Master's) in all branches of Chemistry, Physics, Mathematical Sciences, Materials Science and Engineering, and Chemical engineering are welcome to apply.
If you are seeking an exciting opportunity to become part of a multidisciplinary team of esteemed researchers converging around the shared technologies and innovative research methods essential for battery and fuel cell development, please read through the opportunities below and
Department of Chemistry
There are 4 PhD studentships available in the Warwick Electrochemistry and Interfaces Group led by Profs and .
Profs Unwin and Macpherson are internationally-leading electrochemists with vast experience. The offers ground-breaking instrumental electrochemical techniques, especially in the fields of nanoelectrochemistry, electrochemical imaging, kinetics and mechanisms, hydrodynamic techniques, spectroscopy, microscopy (AFM and STEM), programming, data analysis, and multiphysics modelling.
We shall explore the fundamental electrochemistry of electrocatalysts and battery electrode materials, using a range of techniques available at Warwick. PhD projects will be tailored to the interests of students and can include, to different degrees, materials-focused studies, technique development, microscopy-spectroscopy, and analysis/programming (including AI and machine learning). We use innovative high-resolution identical-location multi-microscopy strategies that enable electrochemical processes to be studied on electrode materials at the single entity level - single atoms, nanoparticles, grain boundaries, step edges, terraces and crystallographic facets. Our general strategy produces large electrochemical datasets that are correlated with data from complementary co-located microscopy to reveal structure-activity relationships in unprecedented detail. This information then informs rational catalyst design and formulation that are investigated with a wide array of larger scale
techniques. Example project areas include:
(1) Impact of metal or metal alloy crystallographic orientation on ammonia electrocatalysis to enable design of the most efficient catalysts.
(2) Understanding what controls electrocatalytic stability, long term catalyst deactivation routes and how to mitigate against them to improve catalyst operational lifetimes.
(3) Use of operando spectroscopic techniques to identify catalyst reaction pathways during ammonia oxidation.
(4) Development of next-generation high-throughput screening techniques, through AI-enabled instrumentation.
(5) Understanding the evolution of battery electrode performance (charging/discharging) from the single particle to whole cell level.
(6) Development of new membranes and electrode structures for fuel cells and batteries using 1D and 2D materials.
Publications from Profs Unwin & Macpherson (Google Scholar):
There are 2 PhD studentships available in the research group of
The focus is the targeted chemical synthesis of materials as electrocatalysts and as battery electrode materials, using a wide range of analytical methods for atomic-scale structural characterisation. The projects will build on the expertise of the in materials for electrolysis and for the oxidation of organics. Guided by the applications and the device requirements we will focus primarily on mixed-metal transition-metal oxide materials, with precise control of atomic content and metal oxidation states to prepare novel compositions, with the possibility of crystallisation of new crystal structure types. This will make use of solution chemistry under hydrothermal conditions that will provide unique chemistry to provide the necessary control over crystallisation, also offering tuneable crystal morphology from the nanoscale to the microscale, so providing the chance to prepare materials with highly active surface for electrocatalysis or lithium insertion. Structural
investigation will allow us to determine average crystal structure with use of X-ray diffraction (powder or single crystal), small-angle scattering to determine nanostructure, and X-ray spectroscopy to examine oxidation state and local atomic environment. This will allow us to rationalise the properties of the new materials, as determined by the collaborating groups, to then fine-tune materials synthesis to optimise their performance. Extending this work beyond polycrystalline powders, we will also investigate solution crystallisation to modify electrode surfaces, with growth of oxide coating from hydrothermal chemistry, or with metal-organic frameworks that will provide a high concentration of unique active sites to enhance electrochemical activity.
Publications from Prof Walton (Google Scholar):
Warwick Manufacturing Group
There are 4 PhD studentships available in the Warwick Manufacturing Group, under the supervision of and .
Prof Piper and Dr Loveridge have vast experience in functional materials for energy storage/harvesting applications (e.g. Li-ion batteries & photocatalysts for hydrogen generation), along with the development of various advanced characterization methods. WMG has a suite of laboratories for synthesis, electrochemistry and battery scale-up, which boast cutting-edge facilities for accelerating material developments at laboratory scale into pilot line validation.
Key areas for PhD research include:
(1) Tuning electrode-electrolyte interfaces in batteries for improved performance and lifetime. This area includes the synthetic cathode-engineering of morphology and composition; precise (and scaleable) atomic decoration of electrode interfaces for improving transport and suppressing degradation; and studying reactions at buried interfaces (e.g. operando gas evolution).
(2) Electrolyte additive discovery to generate more stable and effective SEI layers to extend operational lifetimes.
(3) Scale-up of industry-grade electrodes for real cell studies. This includes formulation and electrode fabrication technologies (both slurry and dry processing), 3D spectro-microscopy imaging for electrode optimization, and fuel cell assembly with operando X-ray/Neutron studies for interpreting electrochemistry.
(4) Advancing the next generation of electrode technologies that will take anode science beyond graphite with smart design and generation of stabilised interfaces to allow metal anode / anode-free development. All projects will involve the use of advanced characterisation approaches to probing interfaces using state-of-the-art measurement techniques.
(5) A holistic view of electrochemical optimization: From single-particle electrochemistry to operando full pouch cell battery studies (in collaboration with Profs. Unwin & Macpherson).
(6) Holy grail Li-metal batteries: how to suppress dendritic formation with lithium metal anodes with interface engineering.
Publications from Prof Piper & Dr Loveridge (Google Scholar):
Department of Engineering
There are 2 PhD studentships available in the research group of .
Prof Tao's research activities involve the areas of fuel cells, electrolysers, batteries, super-capacitors, electrochemical synthesis of ammonia and formic acid, catalysts for ammonia synthesis, CO2 and O2 separation. The focus of research activities for CEFT is Direct Ammonia Fuel Cells (DAFCs), electrolysers and electrochemical synthesis of ammonia and methanol. Tao's group invented low temperature DAFCs based on either polymeric or ceramic OH- ionic conducting electrolytes. DAFCs have the potential for transport applications, such as vessels, trains, lorries, coaches even cars. The main barrier is lack of low-cost electro-catalysts for the ammonia oxidation reaction (AOR), which is the key anode material for direct DAFCs. Currently the state-of-the-art AOR catalyst is PtIr alloy, which is expensive. To reduce cost, two strategies will be applied: (1) To reduce the usage/loading of PtIr by applying the single atomic, dual atomic electro-catalysts or introduction of
low-cost elements such as Ni in the PtIr alloy; (2) Investigation of alternative AOR catalysts. Small pilot DAFC stacks will also be fabricated as part of the project with the first target being a 100 W stack.
The two PhD studentships are focused in the following areas:
(1) Develop electrocatalysts for ammonia oxidation reaction (AOR) to be used as the anode for Direct Ammonia Fuel Cells.
(2) Develop electrocatalysts for the synthesis of ammonia or methanol at mild conditions.
(3) Develop materials for robust and low-cost electrolysers for green hydrogen production.
Publications from Prof Tao (Google Scholar):
Generously funded